Panel fence systems are robust and long-lasting; however, they often fail to provide privacy. When a more enclosed and decorative appearance is desired around gardens, villas, residential complexes, workplaces, or other facilities, artificial grass fencing (grass-look fencing) can be applied over existing panel fences.
With precise measurements, proper fastening techniques, and the selection of the right product, installing artificial grass fencing onto a panel fence can be a straightforward process.
At Çimtelsan Wire and Fence Systems, we manufacture artificial grass fencing and leaf-style fencing in various heights and mesh sizes at our production facility in the Velimeşe Organized Industrial Zone (OSB), Tekirdağ.
In this guide, we outline the essential steps for applying artificial grass fencing to a panel fence.
Can Artificial Grass Fencing Be Applied Over Panel Fencing?
Yes.
If the existing panel fence system is in sound condition, artificial grass fencing can be applied directly onto it.
This method is particularly preferred for the following areas:
Villa gardens
Residential complex perimeters
Factories
Warehouses
Workplaces
Schools
Sports facilities
Café and restaurant surroundings
Parking lots
Detached houses
Leveraging the existing supporting structure of the panel fencerlanıldığı için sıfırdan yeni bir çit sistemi kurmaya göre daha pratik olabilir.
What Should Be Checked Before Installing a Grass Fence?
Before beginning the installation, the condition of the existing panel fence must be checked.
Specifically:
Are the posts secure? There should be no bending or loosening in the panel fence posts.
Are the panels fixed firmly? If any panel connection points are loose, they must be tightened first.
Is there any rust or damage? Sections with significant deformation should be repaired or straightened.
Is the height appropriate? The height of the artificial grass covering should be chosen to match the height of the existing panel fence.
It is not advisable to apply a covering over a panel fence that is not structurally sound.
How to Take the Correct Measurements for a Grass Fence?
First, the total length of the fence must be measured.
Next, the height is determined.
Basic calculation:
Length × Height = Total m²
For example:
50 meters in length × 1.50 meters in height = 75 m²
Approximately 75 m² of artificial grass fencing is required for this area.
When using standard 10-meter rolls, a 50-meter length would theoretically require:
50 ÷ 10 = 5 rolls
Before placing an order, factors such as gates, corners, and the extra material needed for cutting should also be taken into account.
Which Artificial Grass Fence Height Should Be Chosen?
The height of the artificial grass fencing should be selected based on the dimensions of the existing panel fencing.
Common heights include:
100 cm, 120 cm, 150 cm, 180 cm, and 200 cm.
For instance, using 150 cm artificial grass fencing for a 150 cm-high panel fence makes installation easier and results in a more uniform appearance.
How to Choose Eye Spacing?
When selecting artificial grass fencing, the mesh size (aperture) is an important criterion.
In the production range offered by Çimtelsan, the following options are available to suit various usage requirements and budget needs:
45 × 45 mm
50 × 50 mm
55 × 55 mm
Customers seeking a denser product may prefer smaller mesh sizes.
For projects requiring a more economical solution, other options can be considered.
The key factor is not just the price; rather, it is the combination of product density, the intended area of use, and the desired visual appearance.
How to Install Artificial Grass Fencing onto a Panel Fence?
The installation process can essentially be broken down into a few stages.
- Clean the Panel Fence
Remove any mud, heavy dirt, or foreign objects from the surface where the installation will take place, as these can hinder the process.
It is particularly important to ensure that the connection points remain accessible.
- Unroll the Artificial Grass Fence
Unroll the material in front of the panel fence or on a flat surface.
Before proceeding with the installation, ensure it is oriented in the correct direction.
Check the alignment of the top and bottom edges of the roll against the panel fence.
- Begin Securing from the Top
Securing the top section first generally makes the installation process easier when positioning the artificial grass fence onto the panel.
Once the product is properly aligned, establish attachment points at regular intervals.
Rather than fastening it too tightly at a single point, it is better to distribute the load across the entire length of the fence.
- Secure the Middle Sections
After the top section is secured, proceed to attach the middle portions.
This step helps prevent the product from shifting in the wind or pulling away from the panel surface.
- Secure the Bottom Section
Finally, attach the bottom section of the product to the panel.
Leaving the bottom loose can both detract from the appearance and increase the load placed on the material by the wind.
- Check the Seams
If multiple rolls are used, ensure that the points where they meet appear as seamless as possible.
There should be no gaps between the rolls.
It is important to ensure that a sufficient number of fasteners are used at the seams.
How to Secure a Grass Fence?
The application method may vary depending on the project.
Generally, mounting elements suitable for panel systems are used.
The purpose should be:
to securely fasten the product to the panel,
to distribute the load evenly,
to avoid damaging the product,
to reduce movement in the wind.
Fixing intervals should be determined according to the panel structure, height, and external environmental conditions.
Especially in open and windy areas, sufficient connection frequency is important.r.
How Is Installation Done in Corners?
Corner points are among the areas that require the greatest care during installation.
Depending on how the product turns a corner, it may be necessary to:
bend it in a controlled manner,
cut it at the appropriate point,
or join it to another roll.
If any cutting is required, it must be done in a way that does not compromise the product’s structure.
Leaving any slack at the corners can result in an unsightly appearance over time.
Can Artificial Grass Fencing Be Applied to a Gate?
Yes, artificial grass fencing can be applied to suitable gate structures.
However, because the gate is a moving element, the weight of the product and the method of attachment are important considerations.
For both pedestrian and vehicle gates, the following must be checked:
the load-bearing capacity of the hinges,
the ability of the gate to open and close smoothly,
and ensuring that the fasteners do not obstruct movement.
The dimensions of the gate must be calculated separately, and the installation should be carried out accordingly.
Most Common Mistakes Made During Assembly
Insufficient Securing
Using too few fasteners may cause the product to shift or move in the wind.
Incorrect Measurements
Failure to take accurate measurements prior to installation can lead to unnecessary material waste or insufficient orders.
Neglecting to Inspect the Existing Fence
Installing the product directly onto an existing fence that is loose or damaged may cause future issues.
Visible Seams or Joints
If the connections between rolls are not executed properly, the overall appearance may be compromised.
Over-tensioning the Product
Stretching the artificial grass fencing to the point where its natural structure is distorted should be avoided.
It should be installed in a way that is neat yet maintains a natural appearance.
Can You Install Artificial Grass Fencing Yourself?
For small and simple installations, the assembly can be carried out by the user.
However, for:
long perimeter fencing,
tall fences,
projects with numerous corners,
installations involving gates,
or commercial and industrial projects,
professional installation may be preferred.
Proper installation affects both the appearance and the service life of the product.
Grass Fence or Leaf Fence?
Both artificial grass fencing and artificial foliage fencing can be applied over existing panel fencing.
Artificial Grass Fencing
Suitable for projects that require a more uniform and dense green appearance.
Artificial Foliage Fencing
A great choice for spaces where a more decorative, plant-like aesthetic is desired.
Artificial foliage fencing, in particular, offers a unique alternative for villas, terraces, cafes, restaurants, and various landscaping projects.
Artificial Grass Fence Installation and Factory-Direct Sales in Tekirdağ
Çimtelsan carries out its production at its factory located in the Velimeşe Organized Industrial Zone (OSB) in Tekirdağ.
In particular,
our factory’s location offers a significant logistical advantage for customers in the following regions:
Tekirdağ, Çorlu, Ergene, Çerkezköy, Kapaklı, Kırklareli, Edirne, and Silivri.
For projects, we can provide either product supply alone or, depending on specific requirements, comprehensive assembly solutions.
What Information Is Needed to Order a Grass Fence?
To calculate the cost and determine the necessary materials, please provide us with the following information:
Total length: How many meters?
Height: 100, 120, 150, 180, or 200 cm?
Existing system: Is there already a panel fence in place?
Mesh size preference: 45×45, 50×50, or 55×55 mm?
Gates: Are any pedestrian or vehicle gates required?
Delivery location: Province/district?
Installation: Are you looking for the products only, or is installation also required?
With this information, we can more accurately calculate the total square footage and the number of rolls needed for your project.
Get a Quote for Artificial Grass Fencing on Panel Fences
If you would like to transform your existing panel fence into a more enclosed, green, and decorative feature, you can send us the dimensions for your project.
Çimtelsan Tel ve Çit Sistemleri
Factory Address: Velimeşe OSB, Tekirdağ, Türkiye
WhatsApp: +90 532 469 61 35
Instagram: @cimtelsan
www.cimtelsan.com
Please provide the total length and the fence height; we will calculate the required square footage and the number of rolls for you.
